Pilot Light Wont Stay Lit
Do not let pilot light wont stay lit disrupt your comfort. Our experts diagnose and fix this quickly.
Common Symptoms
- pilot keeps going out
- no pilot flame
- furnace wont ignite
Understanding Pilot Light Wont Stay Lit
Pilot Light Wont Stay Lit is a common HVAC issue affecting comfort and efficiency. Symptoms like pilot keeps going out or no pilot flame should be addressed promptly.
North Bay HVAC diagnoses this issue across North Bay & Wine Country homes by checking the equipment sequence, airflow, controls and safety conditions before recommending a repair.
This requires prompt attention. Contact us immediately.
Direct Answer: What Pilot Light Wont Stay Lit Usually Means
Pilot Light Wont Stay Lit usually means the HVAC system needs diagnosis at the thermostat, airflow path, electrical controls, refrigerant circuit, ignition sequence or duct system. Homeowners commonly notice pilot keeps going out or no pilot flame. Common causes include faulty thermocouple, draft issues, dirty pilot. Do not keep running the system if the symptom is getting worse, creating odor, leaking water, freezing up, tripping electrical protection or affecting safety.
Safe Checks Before You Call
- Check that the thermostat is set to the intended mode and temperature.
- Replace a visibly dirty filter and confirm supply and return vents are open.
- Write down any error codes, sounds, smells, water, ice or breaker behavior.
- Confirm the furnace switch and breaker are on if there is no odor, smoke or safety alarm.
- Do not relight or bypass gas controls if ignition problems repeat.
When to Stop Running the System
Turn heating off and call for service if you smell gas, hear delayed ignition, see a yellow or unstable flame, or the furnace repeatedly starts and shuts down.
What a technician checks
- 1.Thermostat call and control sequence
- 2.Electrical safeties, wiring and equipment startup behavior
- 3.Filter, return path, blower operation and static pressure clues
- 4.Ignition sequence, flame sensing, venting, gas controls and heat exchanger safety clues
Common Causes
faulty thermocouple
We can diagnose if this is your issue.
draft issues
We can diagnose if this is your issue.
dirty pilot
We can diagnose if this is your issue.
gas supply problems
We can diagnose if this is your issue.
Services That Help
Pilot Light Wont Stay Lit FAQs
Practical answers for homeowners dealing with pilot light wont stay lit
What should I do first if I have pilot light wont stay lit?
Start with safe checks: thermostat mode, filter condition, open vents and any visible water, ice, odor, breaker trip or error code. Turn heating off and call for service if you smell gas, hear delayed ignition, see a yellow or unstable flame, or the furnace repeatedly starts and shuts down.
Can I keep running the system with pilot light wont stay lit?
It is usually better to shut the system down until it is diagnosed, especially if the symptom involves no heating or cooling, ice, water, electrical trips, gas odor, combustion concerns or smoke.
What causes pilot light wont stay lit?
Common causes include faulty thermocouple, draft issues, dirty pilot, gas supply problems. The exact cause depends on the equipment type, maintenance history, thermostat behavior, airflow and whether the issue affects one room or the whole home.
Which HVAC service usually fixes pilot light wont stay lit?
Most symptoms start with diagnostic service. Depending on the findings, the fix may be AC repair, furnace repair, heat pump repair, thermostat work, duct repair, maintenance or an indoor air quality solution.
Ready to Get Started?
Connect with our expert team for all your heating and cooling needs. Fast response, transparent pricing, guaranteed results.